What is a self‑inflating mat and how does it work
To understand how a self‑inflating mat is constructed and operates, think of a dish‑washing sponge. It’s made of foam, and if you compress it, it releases air that’s “hidden” in its cells. When the pressure is released, the foam expands and draws the air back in. Inside a self‑inflating mat there’s a similar foam, only denser and more resilient. Unlike the sponge, this foam layer is sealed with fabric. Air enters and exits the mat only through a valve. Thus a thick mat can initially be compressed, expelling air, then folded in half and rolled into a compact roll.
But why self‑inflating? Because the foam inside the mat expands and draws air in through the valve. This allows the mat to unfold to about two‑thirds of its full size, after which you only need to give it a slight boost with a pump or your mouth. However, a new mat hardly inflates on its own, as the foam has spent a long time in a compressed state. So for the first few uses it’s best to inflate it manually.
There’s also a rule – the greater the volume of foam inside a self‑inflating mat, the better it inflates on its own. For example, thick camping self‑inflating mattresses fill with air most readily. But most modern self‑inflating mats have perforated foam to make them lighter and more compact. Consequently they expand slowly. Still, they save effort and time. You can set up your tent, open the mat’s valve and toss it inside. In 20–30 minutes the foam will take up to half its volume, and you’ll only need to give 3–4 deep breaths to ready the mat for the night.
How inflatable camping mats are constructed
These mats also have a valve and are glued from airtight fabric. There is no foam inside, so you have to inflate the whole volume yourself. You can do it with your mouth, but a pump is better. Sometimes the pump is built into the mat itself or its packing sack. Sometimes they are portable electric pumps powered by a battery. They also retain heat in other ways. For example, manufacturers hide insulation—synthetic fill or down—inside the air chambers. This is how the makers of Exped, Sea to Summit, Rab and Mountain Equipment design their mats. Another way to keep an inflatable mat warm is to increase the number of air chambers. They make many chambers and stack them in “two layers” so that body‑warmed air circulates minimally and does not cool against the ground. The inner walls of the chambers are covered with a metallized film that reflects heat like a survival blanket. Such mats become lighter than self‑inflating ones and the most compact when rolled up—you can roll them down to the size of a 1‑liter bottle, sometimes even smaller. This is the principle behind insulated inflatable mats from Therm‑a‑Rest and Nemo.
Some mats are not insulated—these models are a lightweight alternative to inflatable PVC mattresses, which are used as a temporary bed in the city and in the outdoors. You have probably seen those thick blue and black “rubber” mattresses at cottage or camping neighbors.
Foam Mats
Have you seen colorful rolls on hikers’ backpacks or on the beach? That’s a foam mat, or “foam sleeping pad”. They are made from sheets of closed‑cell foam, meaning that when you press them, the air does not escape. It stays “trapped” inside the foam cells, having been introduced during manufacturing. Such mats are made from expanded polyethylene or ethylene‑vinyl acetate (EVA).
Because the air in a foam mat does not leave, the volume of the foam sleeping pads stays constant no matter how you roll them. Therefore they cannot be made thick, as a rolled‑up mat would become too large and heavy.
There is no perfectly suitable mat for every camper. So when choosing a sleeping pad you need to define the conditions of its use and find an optimal balance among the following characteristics:
- Thermal insulation.
- Weight.
- Comfort.
- Size.
How warm the camping mat should be
You can determine this by the R‑Value—higher values mean a “warmer” mat. An R‑Value (or simply R) from 0 to 1.9 indicates a summer mat, 2 to 3.9 – models for shoulder season and the first frosts, and 4 and above – mats for winter use. Models with R‑Value 6 and higher are suitable for very low temperatures. Moreover, the insulation of mats simply adds up. This means that for extreme cold you don’t have to buy a separate mat; you can lay two mats together. For example, an insulated inflatable with R‑Value 4, and beneath it a thick foam mat with R‑Value 2. In this way, two mats can meet the needs of a camping mattress for the whole year.
We have compiled an approximate translation of the R‑Value to surface temperature on which the mat is placed into a table, using the recommendations of Exped as a guide.
| R‑Value of the mat | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|
| Temperature, °C | +10 | 0 | -5 | -10 | -20 | -30 | -40 |
The R value is assigned to mats based on testing to the ASTM F3340‑18 standard. The mat is clamped between a heated and a cold metal plate, and the energy required to keep the heated plate at a constant temperature is measured. The software then calculates the mat’s thermal insulation. This testing is voluntary, but most gear brands on the market – Therm‑a‑Rest, Exped, Klymit, Rab, Mountain Equipment, Ferrino, Sea‑to‑Summit, Nemo, Big Agnes – try to follow it.
How much does a trekking mat weigh?
The most important thing is that the mat is warm enough; its weight is secondary. Ideally you pick the lightest and most compact option among the warm ones. That approach, however, hits the wallet hard. The most expensive mats in the industry are models that combine low weight with a high R‑Value. For example, the Therm‑a‑Rest XTherm NXT weighs only 440 g with an R‑Value of 7.3, and the Nemo Tensor Extreme is 472 g with an R‑Value of 8.5, but they cost just over $300. By comparison, the classic Russian‑made foam mat “Izolon” weighs 430 g, has an R‑Value of 1.3, and costs about $15.
How to gauge the weight of hiking mats? We’ll set the range. The lightest trekking mat on the market is the Sirex Kanchen Junga foam, weighing 130 g. The heaviest mats that still qualify as trekking mats are around 850 g. Anything heavier is usually considered a camping mat, and its weight is unjustified for a backpacking pack. On the other hand, if you want to sleep like royalty on the trail, you can afford a kilogram‑weight mat, saving weight elsewhere.
The average weight of a standard‑size trekking mat hovers around 550 g.
Is a thick mat automatically comfortable?
The thicker the mat, the better it smooths out surface irregularities – rocks, ledges, roots – on which you sleep. However, thickness alone does not determine how comfortable the mat will be.
All else being equal, self‑inflating mats are the most comfortable. Inside them is a resilient foam, similar to that found in many sleeping pillows and mattresses. It prevents air from flowing freely inside the mat when you turn over in your sleep, so body support and mattress thickness stay almost constant. This makes sleeping more comfortable and reduces the chance of slipping off the mat. The foam also dampens air resonance, so you won’t hear any fabric creaks or crunches while moving on it.
Inflatable camping mats can win on comfort over self‑inflating ones thanks to greater thickness. If inflatable models have an average thickness of about 6 cm, self‑inflating ones are only 3‑3.5 cm. However, much depends on the construction. Inflatable mats are a bit more comfortable when they have many air cells, like Sea‑to‑Summit mattresses, or when the air chambers run crosswise, as in Therm‑a‑Rest NeoAir series or Bach reLAY mats. In those, air flow inside the mattress is barely felt. Yet the creaking and rustling of the fabric aren’t eliminated – the voids inside inflatable mats resonate. Usually these sounds are quiet and don’t disturb sleep, but they’re worth mentioning.
The least comfortable are foam pads. They have a thin profile and high material density. They barely smooth out ground irregularities and only provide thermal insulation. However, foam isn’t all the same. Pads with cells or transverse ribs can be warmer and more comfortable for sleeping than their flat counterparts made from the same material.
How to choose the right size for a camping mat
The standard size for foam mats is 180 × 60 cm, and for self‑inflating and inflatable mats it’s 183 × 53 cm. This size is usually marked as “M”, “R”, “Reg” or “Regular”. These dimensions have become industry standards on their own. Foam mats aren’t made wider than 60 cm because a rolled-up roll would become too bulky. Inflatable and self‑inflating mats are made narrower so that the “standard” size is lighter and more compact. In both cases the dimensions are based on the sleeping‑area sizes of modern tents.
A single‑person bed is 80 cm wide, so camping mats may seem narrow. In practice they fit most medium‑built hikers up to about 180 cm tall. For example, the article’s author is 178 cm tall, weighs 75 kg, wears size M/L clothing and sleeps comfortably on a Therm‑a‑Rest mat that is 53 cm wide. For heights over 180 cm you can buy an extended mat marked “Long” or “L” – those reach up to 197 cm, rarely up to 2 m. Alternatively, you can place a rolled‑up clothing bundle under the head.
Heavier‑built hikers should look for wider mats – 65‑70 cm. They are usually indicated by the letter “W” for wide. For instance, the Exped SIM Ultra MW is a standard‑length mat with increased width: 183 × 65 cm. The Exped SIM Ultra LW is enlarged in both length and width, i.e., 197 × 65 cm.
You may encounter very short mats, 119‑130 cm long, marked as “S”, “Small” or “3/4”. They are designed for ultra‑light backpackers who want to cut the pack weight to the minimum. The shortened size lets you shed at least a third of the sleeping‑pad weight. For example, the Therm‑a‑Rest Prolite Plus weighs 650 g in its standard size and 450 g in the short version. Short mats are placed under the hips and torso, where the body exerts the most pressure. Under the legs you can put a half‑empty backpack, and under the head a rolled‑up clothing pillow.
If you travel regularly as a pair, you can buy a two‑person sleeping pad. It will be more comfortable for sleeping because there are no seams, and it will be lighter than a pair of single‑person pads.
A camping pad can be rectangular or taper toward the feet. Tapered pads weigh less and fit better into ultralight tents whose floor narrows from the head to the foot end. Rectangular pads are more comfortable and familiar for sleeping.
Foam or inflatable pad: which is better
This question often sparks heated debates. But we’ll try to give an answer.
Objectively, a foam pad is an excellent choice for a beginner camper. It’s light—350‑450 g, inexpensive, low‑maintenance and warm enough for summer hikes. Plus, a foam pad can be unfolded quickly at a rest stop because you don’t have to inflate anything. The only drawback is its large size—you’ll almost certainly have to strap it to the outside of your pack. So if you’re unsure whether to buy an “inflatable,” feel free to take a foam pad for your first camping season.
The only selection tip: choose a thicker, softer model right away, even if it costs a bit more and adds a little weight. For example, pads 10‑12 mm thick or foams with cells/ribs such as Therm‑a‑Rest Ridgerest, Naturehike Thickened Folding Egg Nest, Sirex Bubble Mat or Therm‑a‑Rest Z‑Lite. They will be warmer and softer than thin 8 mm pads, and adapting to sleeping in a tent will be easier.
Our experience shows that after switching to a self‑inflating or inflatable pad, few people return to sleeping on a regular foam pad. Campers are even willing to carry an extra 150‑300 g in their backpacks. The warmth, softness and compact packed size outweigh both the higher price and the added weight. In winter, shoulder season, or cold high‑altitude conditions, self‑inflating and warm inflatable pads have no safe alternative. Even with two foam pads in such conditions there’s a risk of freezing, and you still have to figure out how to stow them in/on the pack! Therefore, foam pads have long become just an accessory to inflatable pads for many hikers. For example, a group of 3‑4 people might carry one pad so that a “tablecloth” can be quickly spread out at a rest stop.
Why a yoga mat isn’t suitable for a hike
Visually, yoga mats and camping foam pads look almost identical. That’s why the temptation often arises – why not take the same mat you use for fitness on a trekking route?
The problem is that these mats are designed for different tasks. Yoga mats are thin, dense, and their main purpose is to prevent slipping, providing a reliable surface for exercises. As a result, their thermal insulation, softness/flexibility, and sometimes durability suffer. Sleeping on a yoga mat will be hard, cold, and it’s easier to puncture or cut compared with a purpose‑built camping pad.
Should you fear punctures in a camping pad
Except for the ultra‑lightest models, modern self‑inflating and inflatable sleeping pads are made from durable fabrics with a density of 50‑75 D. The same fabrics are used for tent floors and are hard to damage. Consequently, these pads require only minimal care in use. Dry pine needles or a rocky outcrop will not puncture them, so even manufacturers do not forbid using them outside a tent. Moreover, repairing the small punctures that tourists most often encounter is not difficult. The key is to carry a repair kit with you.
Only pads in the “ultralight” category need careful handling – their use outside a tent without a protective cover or an extra underlay is not recommended. Even so, such pads are punctured rarely.
Scenarios for buying a camping sleeping pad
So which camping pad should you buy? Under what circumstances and for what purpose should you prefer one class of sleeping pads over another:
When is it best to buy a foam pad?
- When the budget is tight, because the main advantage of “foam” is its low price. Any camper can afford it, and the pads can be replaced even every season.
- For classic lightweight trekking, which involves long, technically easy routes with a small backpack in warm weather. The relatively low weight of foam combined with reliability and versatility fully meets the requirements of lightweight travel.
- As an addition to a self‑inflating or inflatable pad, a foam mat increases the overall thermal insulation of the sleeping area, protects the inflatable pad from punctures, and can be used on its own for short stays.
When is it best to buy a self‑inflating pad?
- When you need a sensible compromise between price, weight, comfort and durability. By these criteria, self‑inflating pads suit most types of outdoor activity.
- As a lighter, more compact, warmer and more comfortable alternative to PVC mattresses – suitable for home, cottage and campsite use.
When is it best to buy an insulated inflatable pad?
- When you need the most efficient “weight/thermal insulation” ratio combined with high sleeping comfort. Any camper will appreciate this advantage, but it shines most in mountaineering, alpine tourism and long winter expeditions.
When is it best to buy an uninsulated inflatable pad?
- As a more comfortable and lighter alternative to the traditional foam pad. In warm weather their insulation is sufficient, and many models are robust enough for use outside a tent.
- As a light and compact replacement for an inflatable PVC mattress at home, in campsites and while traveling.