What is actually filled
People sometimes speak of filling a scuba set, but gas goes into the cylinder, not the regulator or the entire equipment assembly. Compressed air intended for breathing must meet the applicable breathing-gas requirements. An ordinary workshop compressor is not suitable for diving merely because it can generate pressure.
Air, nitrox and other mixtures involve different equipment and user-training requirements. The gas and its suitability for a particular dive are established through training and dive planning, not a general-purpose article.
Before handing over the cylinder
Tell the operator the cylinder type, working pressure, service history and intended gas. Ask whether the centre accepts that model and which inspection or test records it requires. Procedures and intervals depend on the equipment and applicable requirements; there is no single interval for every cylinder.
A specialist needs to assess damage, corrosion, signs of overheating or a faulty valve. Do not conceal a dropped cylinder, a questionable repair or an unknown history, and do not attempt a repair yourself before a fill.
Assessing the filling station
Ask who is responsible for compressor servicing, filters and gas-quality checks. Look for an organised station with a clean working area, an air intake arranged as the manufacturer specifies and trained staff. The absence of an obvious smell does not prove the gas is clean.
Connection, filling conditions, temperature and pressure monitoring, shutdown and disconnection are work for a trained operator following the station’s procedures and equipment instructions. A short internet checklist cannot replace that training.
After collecting the cylinder
Check the cylinder identification, the gas ordered and the fill record. If you use a mixture requiring analysis, carry out the analysis and labelling prescribed by your training. Do not use contents whose composition or origin is uncertain.
If you suspect a problem, stop preparing for the dive and contact the operator. A shallower or shorter dive does not compensate for unknown gas quality.
Before the next dive
Keep servicing and fill records with your equipment documents. Arrange your visit in advance so checks are not rushed at the water’s edge. This article helps you deal with a filling station; it is not a procedure for filling cylinders yourself.